Who Makes the IoT Things Under Attack?

October 3, 2016

As KrebsOnSecurity observed over the weekend, the source code that powers the “Internet of Things” (IoT) botnet responsible for launching the historically large distributed denial-of-service (DDoS) attack against KrebsOnSecurity last month has been publicly released. Here’s a look at which devices are being targeted by this malware.

The malware, dubbed “Mirai,” spreads to vulnerable devices by continuously scanning the Internet for IoT systems protected by factory default usernames and passwords. Many readers have asked for more information about which devices and hardware makers were being targeted. As it happens, this is fairly easy to tell just from looking at the list of usernames and passwords included in the Mirai source code.

iotbadpass-pdf

In all, there are 68 username and password pairs in the botnet source code. However, many of those are generic and used by dozens of products, including routers, security cameras, printers and digital video recorder (DVRs).

I examined the less generic credential pairs and tried to match each with a IoT device maker and device type.  As we can see from the spreadsheet above (also available in CSV and PDFformats), most of the devices are network-based cameras, with a handful of Internet routers, DVRs and even printers sprinkled in.

I don’t claim to have special knowledge of each match, and welcome corrections if any of these are in error. Mainly, I turned to Google to determine which hardware makers used which credential pairs, but in some cases this wasn’t obvious or easy.

Which is part of the problem, says Will Dormann, senior vulnerability analyst at the CERT Coordination Center (CERT/CC).

“Even when users are interested in and looking for this information, the vendor doesn’t always make it easy,” Dormann said.

Dormann said instead of hard-coding credentials or setting default usernames and passwords that many users will never change, hardware makers should require users to pick a strong password when setting up the device.

Indeed, according to this post from video surveillance forum IPVM, several IoT device makers — including Hikvision, Samsung, and Panasonic — have begun to require unique passwords by default, with most forcing a mix of upper and lowercase letters, numbers, and special characters.

“As long as the password can’t be reversed — for example, an algorithm based off of a discoverable tidbit of information — that would be a reasonable level of security.” Dormann said. Continue reading

Source Code for IoT Botnet ‘Mirai’ Released

October 1, 2016

The source code that powers the “Internet of Things” (IoT) botnet responsible for launching the historically large distributed denial-of-service (DDoS) attack against KrebsOnSecurity last month has been publicly released, virtually guaranteeing that the Internet will soon be flooded with attacks from many new botnets powered by insecure routers, IP cameras, digital video recorders and other easily hackable devices.

The leak of the source code was announced Friday on the English-language hacking community Hackforums. The malware, dubbed “Mirai,” spreads to vulnerable devices by continuously scanning the Internet for IoT systems protected by factory default or hard-coded usernames and passwords.

The Hackforums post that includes links to the Mirai source code.

The Hackforums post that includes links to the Mirai source code.

Vulnerable devices are then seeded with malicious software that turns them into “bots,” forcing them to report to a central control server that can be used as a staging ground for launching powerful DDoS attacks designed to knock Web sites offline.

The Hackforums user who released the code, using the nickname “Anna-senpai,” told forum members the source code was being released in response to increased scrutiny from the security industry.

“When I first go in DDoS industry, I wasn’t planning on staying in it long,” Anna-senpai wrote. “I made my money, there’s lots of eyes looking at IOT now, so it’s time to GTFO [link added]. So today, I have an amazing release for you. With Mirai, I usually pull max 380k bots from telnet alone. However, after the Kreb [sic] DDoS, ISPs been slowly shutting down and cleaning up their act. Today, max pull is about 300k bots, and dropping.”

Sources tell KrebsOnSecurity that Mirai is one of at least two malware families that are currently being used to quickly assemble very large IoT-based DDoS armies. The other dominant strain of IoT malware, dubbed “Bashlight,” functions similarly to Mirai in that it also infects systems via default usernames and passwords on IoT devices.

According to research from security firm Level3 Communications, the Bashlight botnet currently is responsible for enslaving nearly a million IoT devices and is in direct competition with botnets based on Mirai.

“Both [are] going after the same IoT device exposure and, in a lot of cases, the same devices,” said Dale Drew, Level3’s chief security officer.
Continue reading

Advertisement

‘Money Mule’ Gangs Turn to Bitcoin ATMs

September 29, 2016

Fraudsters who hack corporate bank accounts typically launder stolen funds by making deposits from the hacked company into accounts owned by “money mules,” willing or unwitting dupes recruited through work-at-home job scams. The mules usually are then asked to withdraw the funds in cash and wire the money to the scammers. Increasingly, however, the mules are being instructed to remit the stolen money via Bitcoin ATMs.

I recently heard from a reader in Canada who said she’d recently accepted a job as a customer service officer for a company called LunarBay. This company claims to be a software development firm, and told this reader they needed to hire people to help process payments for LunarBay’s clients.

LunarBay’s Web site — Lunarbay[dot]biz — claims the company has been in business for several years, and even references a legitimate business by the same name in the United Kingdom. But the domain name was registered only in late August 2016, and appears to have lifted all of its content from a legitimate Australian digital marketing firm called Bonfire.

The Canadian reader who contacted KrebsOnSecurity about this scam was offered $870 per week and a five percent commission on every transaction she handled. After providing her bank account information to get paid, she became suspicious when she received instructions on how to forward funds on the LunarBay.

The scammers told her to withdraw the money from her account by going into the bank itself — not from the ATM (mainly due to daily withdrawal limits at the ATM). They also sent her a QR code (pictured below) that she was instructed to save as an image on her smartphone. The crooks then proceeded to tell her the location of the nearest Bitcoin ATM:

a) The nearest Bitcoin ATM is located at: 6364 Rue Pascal, Montréal-Nord, QC H1G 1T6, Canada (Bitcoin ATM is located at Dépanneur Pascal 2003 convenience shop in Montreal).

b) You can find the instructions of how to make payment using Bitcoin ATM in this video

c) Please find the image attached to this message. This is a QR code – an unique identification number for a transaction. I ask you to save this image to your smartphone beforehand.

4. The payment must be processed within 3 hours. The Bitcoin rate is constantly changing in relation to CAD, USD and other currencies. That’s why the payment must be made during this time interval.

As the above Youtube video demonstrates, sending funds merely requires the user to scan a QR code shared by the intended recipient, and then insert cash into the Bitcoin ATM. Because Bitcoin is a non-refundable form of payment, once the money is sent the transaction cannot be reversed. Continue reading

Inside Arizona’s Pump Skimmer Scourge

September 27, 2016

Crooks who deploy skimming devices made to steal payment card details from fuel station pumps don’t just target filling stations at random: They tend to focus on those that neglect to deploy various tools designed to minimize such scams, including security cameras, non-standard pump locks and tamper-proof security tape. But don’t take my word for it: Here’s a look at fuel station compromises in 2016 as documented by the state of Arizona, which has seen a dramatic spike in fuel skimming attacks over the past year.

KrebsOnSecurity examined nearly nine months worth of pump skimming incidents in Arizona, where officials say they’ve documented more skimming attacks in the month of August 2016 alone than in all of 2015 combined.

With each incident, the Arizona Department of Agriculture’s Weights and Measures Services Division files a report detailing whether victim fuel station owners had observed industry best practices leading up to the hacks. As we can see from the interactive story map KrebsOnSecurity created below, the vast majority of compromised filling stations failed to deploy security cameras, and/or tamper-evident seals on the pumps.

Fewer still had changed the factory-default locks on their pumps, meaning thieves armed with a handful of master keys were free to unlock the pumps and install skimming devices at will.

These security report cards for fuel station owners aren’t complete assessments by any means. Some contain scant details about the above-mentioned precautionary measures, while other reports painstakingly document such information — complete with multiple photos of the skimming devices. Regardless, the data available show a clear trend of fraudsters targeting owners and operators that flout basic security best practices. Continue reading

The Democratization of Censorship

September 25, 2016

John Gilmore, an American entrepreneur and civil libertarian, once famously quipped that “the Internet interprets censorship as damage and routes around it.” This notion undoubtedly rings true for those who see national governments as the principal threats to free speech.

However, events of the past week have convinced me that one of the fastest-growing censorship threats on the Internet today comes not from nation-states, but from super-empowered individuals who have been quietly building extremely potent cyber weapons with transnational reach.

underwater

More than 20 years after Gilmore first coined that turn of phrase, his most notable quotable has effectively been inverted — “Censorship can in fact route around the Internet.” The Internet can’t route around censorship when the censorship is all-pervasive and armed with, for all practical purposes, near-infinite reach and capacity. I call this rather unwelcome and hostile development the “The Democratization of Censorship.”

Allow me to explain how I arrived at this unsettling conclusion. As many of you know, my site was taken offline for the better part of this week. The outage came in the wake of a historically large distributed denial-of-service (DDoS) attack which hurled so much junk traffic at Krebsonsecurity.com that my DDoS protection provider Akamai chose to unmoor my site from its protective harbor.

Let me be clear: I do not fault Akamai for their decision. I was a pro bono customer from the start, and Akamai and its sister company Prolexic have stood by me through countless attacks over the past four years. It just so happened that this last siege was nearly twice the size of the next-largest attack they had ever seen before. Once it became evident that the assault was beginning to cause problems for the company’s paying customers, they explained that the choice to let my site go was a business decision, pure and simple.

Nevertheless, Akamai rather abruptly informed me I had until 6 p.m. that very same day — roughly two hours later — to make arrangements for migrating off their network. My main concern at the time was making sure my hosting provider wasn’t going to bear the brunt of the attack when the shields fell. To ensure that absolutely would not happen, I asked Akamai to redirect my site to 127.0.0.1 — effectively relegating all traffic destined for KrebsOnSecurity.com into a giant black hole.

Today, I am happy to report that the site is back up — this time under Project Shield, a free program run by Google to help protect journalists from online censorship. And make no mistake, DDoS attacks — particularly those the size of the assault that hit my site this week — are uniquely effective weapons for stomping on free speech, for reasons I’ll explore in this post.

Google's Project Shield is now protecting KrebsOnSecurity.com

Google’s Project Shield is now protecting KrebsOnSecurity.com

Why do I speak of DDoS attacks as a form of censorship? Quite simply because the economics of mitigating large-scale DDoS attacks do not bode well for protecting the individual user, to say nothing of independent journalists.

In an interview with The Boston Globe, Akamai executives said the attack — if sustained — likely would have cost the company millions of dollars. In the hours and days following my site going offline, I spoke with multiple DDoS mitigation firms. One offered to host KrebsOnSecurity for two weeks at no charge, but after that they said the same kind of protection I had under Akamai would cost between $150,000 and $200,000 per year.

Ask yourself how many independent journalists could possibly afford that kind of protection money? A number of other providers offered to help, but it was clear that they did not have the muscle to be able to withstand such massive attacks.

I’ve been toying with the idea of forming a 501(c)3 non-profit organization — ‘The Center for the Defense of Internet Journalism’, if you will — to assist Internet journalists with obtaining the kind of protection they may need when they become the targets of attacks like the one that hit my site.  Maybe a Kickstarter campaign, along with donations from well-known charitable organizations, could get the ball rolling.  It’s food for thought. Continue reading

KrebsOnSecurity Hit With Record DDoS

September 21, 2016

On Tuesday evening, KrebsOnSecurity.com was the target of an extremely large and unusual distributed denial-of-service (DDoS) attack designed to knock the site offline. The attack did not succeed thanks to the hard work of the engineers at Akamai, the company that protects my site from such digital sieges. But according to Akamai, it was nearly double the size of the largest attack they’d seen previously, and was among the biggest assaults the Internet has ever witnessed.
iotstuf

The attack began around 8 p.m. ET on Sept. 20, and initial reports put it at approximately 665 Gigabits of traffic per second. Additional analysis on the attack traffic suggests the assault was closer to 620 Gbps in size, but in any case this is many orders of magnitude more traffic than is typically needed to knock most sites offline.

Martin McKeay, Akamai’s senior security advocate, said the largest attack the company had seen previously clocked in earlier this year at 363 Gbps. But he said there was a major difference between last night’s DDoS and the previous record holder: The 363 Gpbs attack is thought to have been generated by a botnet of compromised systems using well-known techniques allowing them to “amplify” a relatively small attack into a much larger one.

In contrast, the huge assault this week on my site appears to have been launched almost exclusively by a very large botnet of hacked devices.

The largest DDoS attacks on record tend to be the result of a tried-and-true method known as a DNS reflection attack. In such assaults, the perpetrators are able to leverage unmanaged DNS servers on the Web to create huge traffic floods.

Ideally, DNS servers only provide services to machines within a trusted domain. But DNS reflection attacks rely on consumer and business routers and other devices equipped with DNS servers that are (mis)configured to accept queries from anywhere on the Web. Attackers can send spoofed DNS queries to these so-called “open recursive” DNS servers, forging the request so that it appears to come from the target’s network. That way, when the DNS servers respond, they reply to the spoofed (target) address.

The bad guys also can amplify a reflective attack by crafting DNS queries so that the responses are much bigger than the requests. They do this by taking advantage of an extension to the DNS protocol that enables large DNS messages. For example, an attacker could compose a DNS request of less than 100 bytes, prompting a response that is 60-70 times as large. This “amplification” effect is especially pronounced if the perpetrators query dozens of DNS servers with these spoofed requests simultaneously.

But according to Akamai, none of the attack methods employed in Tuesday night’s assault on KrebsOnSecurity relied on amplification or reflection. Rather, many were garbage Web attack methods that require a legitimate connection between the attacking host and the target, including SYN, GET and POST floods.

That is, with the exception of one attack method: Preliminary analysis of the attack traffic suggests that perhaps the biggest chunk of the attack came in the form of traffic designed to look like it was generic routing encapsulation (GRE) data packets, a communication protocol used to establish a direct, point-to-point connection between network nodes. GRE lets two peers share data they wouldn’t be able to share over the public network itself.

“Seeing that much attack coming from GRE is really unusual,” Akamai’s McKeay said. “We’ve only started seeing that recently, but seeing it at this volume is very new.” Continue reading

DDoS Mitigation Firm Has History of Hijacks

September 20, 2016

Last week, KrebsOnSecurity detailed how BackConnect Inc. — a company that defends victims against large-scale distributed denial-of-service (DDoS) attacks — admitted to hijacking hundreds of Internet addresses from a European Internet service provider in order to glean information about attackers who were targeting BackConnect. According to an exhaustive analysis of historic Internet records, BackConnect appears to have a history of such “hacking back” activity.

On Sept. 8, 2016, KrebsOnSecurity exposed the inner workings of vDOS, a DDoS-for-hire or “booter” service whose tens of thousands of paying customers used the service to launch attacks against hundreds of thousands of targets over the service’s four-year history in business.

vDOS as it existed on Sept. 8, 2016.

vDOS as it existed on Sept. 8, 2016.

Within hours of that story running, the two alleged owners — 18-year-old Israeli men identified in the original report — were arrested in Israel in connection with an FBI investigation into the shady business, which earned well north of $600,000 for the two men.

In my follow-up report on their arrests, I noted that vDOS itself had gone offline, and that automated Twitter feeds which report on large-scale changes to the global Internet routing tables observed that vDOS’s provider — a Bulgarian host named Verdina[dot]net — had been briefly relieved of control over 255 Internet addresses (including those assigned to vDOS) as the direct result of an unusual counterattack by BackConnect.

Asked about the reason for the counterattack, BackConnect CEO Bryant Townsend confirmed to this author that it had executed what’s known as a “BGP hijack.” In short, the company had fraudulently “announced” to the rest of the world’s Internet service providers (ISPs) that it was the rightful owner of the range of those 255 Internet addresses at Verdina occupied by vDOS.

In a post on NANOG Sept. 13, BackConnect’s Townsend said his company took the extreme measure after coming under a sustained DDoS attack thought to have been launched by a botnet controlled by vDOS. Townsend explained that the hijack allowed his firm to “collect intelligence on the actors behind the botnet as well as identify the attack servers used by the booter service.”

Short for Border Gateway Protocol, BGP is a mechanism by which ISPs of the world share information about which providers are responsible for routing Internet traffic to specific addresses. However, like most components built into the modern Internet, BGP was never designed with security in mind, which leaves it vulnerable to exploitation by rogue actors.

BackConnect’s BGP hijack of Verdina caused quite an uproar among many Internet technologists who discuss such matters at the mailing list of the North American Network Operators Group (NANOG).

BGP hijacks are hardly unprecedented, but when they are non-consensual they are either done accidentally or are the work of cyber criminals such as spammers looking to hijack address space for use in blasting out junk email. If BackConnect’s hijacking of Verdina was an example of a DDoS mitigation firm “hacking back,” what would discourage others from doing the same, they wondered?

“Once we let providers cross the line from legal to illegal actions, we’re no better than the crooks, and the Internet will descend into lawless chaos,” wrote Mel Beckman, owner of Beckman Software Engineering and a computer networking consultant in the Los Angeles area. “BackConnect’s illicit action undoubtedly injured innocent parties, so it’s not self defense, any more than shooting wildly into a crowd to stop an attacker would be self defense.”

A HISTORY OF HIJACKS

Townsend’s explanation seemed to produce more questions than answers among the NANOG crowd (read the entire “Defensive BGP Hijacking” thread here if you dare). I grew more curious to learn whether this was a pattern for BackConnect when I started looking deeper into the history of two young men who co-founded BackConnect (more on them in a bit).

To get a better picture of BackConnect’s history, I turned to BGP hijacking expert Doug Madory, director of Internet analysis at Dyn, a cloud-based Internet performance management company. Madory pulled historic BGP records for BackConnect, and sure enough a strange pattern began to emerge.

Madory was careful to caution up front that not all BGP hijacks are malicious. Indeed, my DDoS protection provider — a company called Prolexic Communications (now owned by Akamai Technologies) — practically invented the use of BGP hijacks as a DDoS mitigation method, he said.

In such a scenario, an organization under heavy DDoS attack might approach Prolexic and ask for assistance. With the customer’s permission, Prolexic would use BGP to announce to the rest of the world’s ISPs that it was now the rightful owner of the Internet addresses under attack. This would allow Prolexic to “scrub” the customer’s incoming Web traffic to drop data packets designed to knock the customer offline — and forward the legitimate traffic on to the customer’s site.

Given that BackConnect is also a DDoS mitigation company, I asked Madory how one could reasonably tell the difference between a BGP hijack that BackConnect had launched to protect a client versus one that might have been launched for other purposes — such as surreptitiously collecting intelligence on DDoS-based botnets and their owners?

Madory explained that in evaluating whether a BGP hijack is malicious or consensual, he looks at four qualities: The duration of the hijack; whether it was announced globally or just to the target ISP’s local peers; whether the hijacker took steps to obfuscate which ISP was doing the hijacking; and whether the hijacker and hijacked agreed upon the action.

bcbgp

For starters, malicious BGP attacks designed to gather information about an attacking host are likely to be very brief — often lasting just a few minutes. The brevity of such hijacks makes them somewhat ineffective at mitigating large-scale DDoS attacks, which often last for hours at a time. For example, the BGP hijack that BackConnect launched against Verdina lasted a fraction of an hour, and according to the company’s CEO was launched only after the DDoS attack subsided.

Second, if the party conducting the hijack is doing so for information gathering purposes, that party may attempt to limit the number ISPs that receive the new routing instructions. This might help an uninvited BGP hijacker achieve the end result of intercepting traffic to and from the target network without informing all of the world’s ISPs simultaneously.

“If a sizable portion of the Internet’s routers do not carry a route to a DDoS mitigation provider, then they won’t be sending DDoS traffic destined for the corresponding address space to the provider’s traffic scrubbing centers, thus limiting the efficacy of any mitigation,” Madory wrote in his own blog post about our joint investigation.

Thirdly, a BGP hijacker who is trying not to draw attention to himself can “forge” the BGP records so that it appears that the hijack was performed by another party. Madory said this forgery process often fools less experienced investigators, but that ultimately it is impossible to hide the true origin of forged BGP records.

Finally, in BGP hijacks that are consensual for DDoS mitigation purposes, the host under attack stops “announcing” to the world’s ISPs that it is the rightful owner of an address block under siege at about the same time the DDoS mitigation provider begins claiming it. When we see BGP hijacks in which both parties are claiming in the BGP records to be authoritative for a given swath of Internet addresses, Madory said, it’s less likely that the BGP hijack is consensual.

Madory and KrebsOnSecurity spent several days reviewing historic records of BGP hijacks attributed to BackConnect over the past year, and at least three besides the admitted hijack against Verdina strongly suggest that the company has engaged in this type of intel-gathering activity previously. The strongest indicator of a malicious and non-consensual BGP hijack, Madory said, were the ones that included forged BGP records. Continue reading

Ransomware Getting More Targeted, Expensive

September 15, 2016

I shared a meal not long ago with a source who works at a financial services company. The subject of ransomware came up and he told me that a server in his company had recently been infected with a particularly nasty strain that spread to several systems before the outbreak was quarantined. He said the folks in finance didn’t bat an eyelash when asked to authorize several payments of $600 to satisfy the Bitcoin ransom demanded by the intruders: After all, my source confessed, the data on one of the infected systems was worth millions — possibly tens of millions — of dollars, but for whatever reason the company didn’t have backups of it.

This anecdote has haunted me because it speaks volumes about what we can likely expect in the very near future from ransomware — malicious software that scrambles all files on an infected computer with strong encryption, and then requires payment from the victim to recover them.

Image: Kaspersky Lab

What we can expect is not only more targeted and destructive attacks, but also ransom demands that vary based on the attacker’s estimation of the value of the data being held hostage and/or the ability of the victim to pay some approximation of what it might be worth.

In an alert published today, the U.S. Federal Bureau of Investigation (FBI) warned that recent ransomware variants have targeted and compromised vulnerable business servers (rather than individual users) to identify and target hosts, thereby multiplying the number of potential infected servers and devices on a network.

“Actors engaging in this targeting strategy are also charging ransoms based on the number of host (or servers) infected,” the FBI warned. “Additionally, recent victims who have been infected with these types of ransomware variants have not been provided the decryption keys for all their files after paying the ransom, and some have been extorted for even more money after payment.”

According to the FBI, this recent technique of targeting host servers and systems “could translate into victims paying more to get their decryption keys, a prolonged recovery time, and the possibility that victims will not obtain full decryption of their files.”

fbipsi-ransom

Today there are dozens of ransomware strains, most of which are sold on underground forums as crimeware packages — with new families emerging regularly. These kits typically include a point-and-click software interface for selecting various options that the ransom installer may employ, as well as instructions that tell the malware where to direct the victim to pay the ransom. Some kits even bundle the HTML code needed to set up the Web site that users will need to visit to pay and recover their files.

To some degree, a variance in ransom demands based on the victim’s perceived relative wealth is already at work. Lawrence Abrams, owner of the tech-help site BleepingComputer, said his analysis of multiple ransomware kits and control channels that were compromised by security professionals indicate that these kits usually include default suggested ransom amounts that vary depending on the geographic location of the victim.

“People behind these scams seem to be setting different rates for different countries,” Abrams said. “Victims in the U.S. generally pay more than people in, say, Spain. There was one [kit] we looked at recently that showed while victims in the U.S. were charged $200 in Bitcoin, victims in Italy were asked for just $20 worth of Bitcoin by default.”

In early 2016, a new ransomware variant dubbed “Samsam” (PDF) was observed targeting businesses running outdated versions of Red Hat‘s JBoss enterprise products. When companies were hacked and infected with Samsam, Abrams said, they received custom ransom notes with varying ransom demands.

“When these companies were hacked, they each got custom notes with very different ransom demands that were much higher than the usual amount,” Abrams said. “These were very targeted.”

Which brings up the other coming shift with ransomware: More targeted ransom attacks. For the time being, most ransomware incursions are instead the result of opportunistic malware infections. The first common distribution method is spamming the ransomware installer out to millions of email addresses, disguising it as a legitimate file such as an invoice.

More well-heeled attackers may instead or also choose to spread ransomware using “exploit kits,” a separate crimeware-as-a-service product that is stitched into hacked or malicious Web sites and lying in wait for someone to visit with a browser that is not up to date with the latest security patches (either for the browser itself or for a myriad of browser plugins like Adobe Flash or Adobe Reader).

But Abrams said that’s bound to change, and that the more targeted attacks are likely to come from individual hackers who can’t afford to spend thousands of dollars a month renting exploit kits.

“If you throw your malware into a good exploit kit, you can achieve a fairly wide distribution of it in a short amount of time,” Abrams said. “The only problem is the good kits are very expensive and can cost upwards of $4,000 per month. Right now, most of these guys are just throwing the ransomware up in the air and wherever it lands is who they’re targeting. But that’s going to change, and these guys are going to start more aggressively targeting really data intensive organizations like medical practices and law and architectural firms.”

Earlier this year, experts began noticing that ransomware purveyors appeared to be targeting hospitals — organizations that are extremely data-intensive and heavily reliant on instant access to patient records. Indeed, the above-mentioned SamSAM ransomware family is thought to be targeting healthcare firms.

According to a new report by Intel Security, the healthcare sector is experiencing over 20 data loss incidents per day related to ransomware attacks. The company said it identified almost $100,000 in payments from hospital ransomware victims to specific bitcoin accounts so far in 2016. Continue reading

Adobe, Microsoft Push Critical Updates

September 14, 2016

Adobe and Microsoft on Tuesday each issued updates to fix multiple critical security vulnerabilities in their software. Adobe pushed a patch that addresses 29 security holes in its widely-used Flash Player browser plug-in. Microsoft released some 14 patch bundles to correct at least 50 flaws in Windows and associated software, including a zero-day bug in Internet Explorer.

brokenwindowsHalf of the updates Microsoft released Tuesday earned the company’s most dire “critical” rating, meaning they could be exploited by malware or miscreants to install malicious software with no help from the user, save for maybe just visiting a hacked or booby-trapped Web site. Security firms Qualys and Shavlik have more granular writeups on the Microsoft patches.

Adobe’s advisory for this Flash Update is here. It brings Flash to v. 23.0.0.162 for Windows and Mac users. If you have Flash installed, you should update, hobble or remove Flash as soon as possible. Continue reading

Secret Service Warns of ‘Periscope’ Skimmers

September 13, 2016

The U.S. Secret Service is warning banks and ATM owners about a new technological advance in cash machine skimming known as “periscope skimming,” which involves a specialized skimming probe that connects directly to the ATM’s internal circuit board to steal card data.

At left, the skimming control device. Pictured right is the skimming control device with wires protruding from the periscope.

At left, the skimming control device. Pictured right is the skimming control device with wires protruding from the periscope. These were recovered from a cash machine in Connecticut.

According to a non-public alert released to bank industry sources by a financial crimes task force in Connecticut, this is thought to be the first time periscope skimming devices have been detected in the United States. The task force warned that the devices may have the capability to remain powered within the ATM for up to 14 days and can store up to 32,000 card numbers before exhausting the skimmer’s battery strength and data storage capacity.

The alert documents the first known case of periscope skimming in the United States, discovered Aug. 19, 2016 at an ATM in Greenwich, Conn. A second periscope skimmer was reportedly found hidden inside a cash machine in Pennsylvania on Sept. 3. Continue reading